Ice-O-Matic GEM0450A90, 21" Air Cooled Pearl Nugget Ice Machine Head, 415 Lb, 115 Volt
Ice-O-Matic GEM0450A90, 21" Air Cooled Pearl Nugget Ice Machine Head, 415 Lb, 115 Volt is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Description
Description
Model specifics: up to 415 lbs per 24 hours · 21" wide · Pearl nugget ice · air-cooled · 115V single phase · R290 refrigerant
The Ice-O-Matic GEM0450A90 is a 21-inch modular Pearl Ice® machine head that makes up to 415 pounds of soft, chewable nugget ice a day at 70°F air and 50°F water (303 lbs at 90°F air and 70°F water). It is the smallest 21-inch Pearl Ice head, a good fit for cafés, convenience stores, clinics and smaller restaurants that want chewable nugget ice without a large machine, and it runs on a standard 115-volt circuit.
Pearl Ice is nugget-style ice, about 1/2" x 3/8". It cools drinks fast, holds their flavor, is easy to chew and packs well for blended drinks, healthcare and food displays. Making it uses less water and power than making cube ice.
This A90 model uses R290 refrigerant. A load-monitoring system checks the gearbox workload and shuts the machine down before a problem develops. A water sensor protects against low or no water. The evaporator and auger are stainless steel, the industrial-grade double roller bearings need no maintenance, and the gearbox is heavy duty. A built-in non-contact ice detection system shuts the machine off when the bin is full.
Ice bin sold separately: this is an ice machine head only, with no storage. At this output it pairs naturally with the 22-inch B42 (351 lb) bin using the KBT24 bin top, or a 30-inch B40/B55 bin with the KBT19 bin top. Check the bin chart on the spec sheet to see which bins need an Ice-O-Matic bin top kit. Dispenser installations need an adapter kit; the KGEMDISPB ice level control kit is available for dispensers (confirm the adapter with the dispenser manufacturer).
Installation: 115V/60/1, 10.7 A minimum circuit ampacity, 15 A maximum breaker. 3/8" FPT potable water inlet and 3/4" FPT drain. Operates in 50-100°F air with 40-100°F water at 20-80 psi. The machine is air-cooled, so it needs no condenser water; keep the front and rear air paths clear. Ice-O-Matic recommends the IFQ1-FS water filter system with IOMQ-FS replacement cartridges (sold separately).
Warranty: Ice-O-Matic warrants the ice maker for 3 years parts and labor and the compressor for 5 years parts.
Specifications:
- Model: GEM0450A90
- Replaces: GEM0450A
- Ice type: Pearl Ice (nugget), about 1/2" x 3/8"
- Ice production: up to 415 lbs / 24 hr at 70°F air / 50°F water; 303 lbs at 90°F air / 70°F water
- Dimensions (W x D x H): 21" x 24.25" x 27.03"
- Electrical: 115V/60/1, 10.7 A min. circuit, 15 A max breaker
- Condenser: Air-cooled
- Refrigerant: R290, 4.23 oz (120 g) charge
- Energy use: 2.45 kWh per 100 lbs at 70/50°F; 3.7 kWh at 90/70°F
- Potable water: 12 gallons per 100 lbs of ice at 90/70°F
- Heat rejection: about 4,070 BTU/hr
- Exterior: Stainless steel
- Shipping weight: 163 lbs
- Shipping dimensions: 24" W x 27" D x 32" H
- Warranty: Ice maker: 3 years parts and labor; compressor: 5 years parts
Specifications
Specifications
| AMPS | 10.7 A min. circuit, 15 A max breaker |
|---|---|
| COOLING TYPE | Air |
| DIMENSIONS | 21" W x 24.25" D x 27.03" H (W" x D" X H") |
| EXTERIOR | Stainless Steel |
| ICE TYPE | Nugget |
| LBS OF ICE MADE PER 24HRS | 415 |
| NOTE | Modular Pearl nugget ice machine head (replaces GEM0450A); ice bin or dispenser and adapter kit sold separately |
| OEMS | GEM0450A90 |
| PHASE | Single Phase |
| VOLTS | 115V |
| WARRANTY | Ice maker: 3 years parts and labor; compressor: 5 years parts |
| WEIGHT | 163 lb |
Spec Sheet (PDF)
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


