True TPP-AT-67D-4-HC, 67-3/8" 4 Drawer Pizza Prep Table, (9) 1/3 Size Pans

The True TPP-AT-67D-4-HC is a 67-3/8" pizza prep table with four drawers of refrigerated storage and a 9-pan angled rail. Its 19-1/2" cutting board gives room to stretch and top dough, while the 1/4 HP system keeps the pans and the cabinet at 33°F to 41°F.

Features:

• R290 hydrocarbon refrigerant; forced-air system holds 33°F to 41°F in the pans and the cabinet
• Stainless steel front, top and ends with a corrosion-resistant GalFan coated steel back
• Clear-coated aluminum interior with a stainless steel floor
• Comes with (9) 1/3 size pans on a 13° angled rail under insulated stainless steel flat lids
• Extra-deep 19-1/2" full-length removable cutting board
• Front-discharge design; condensing unit slides out from behind the front panel for service
• Each drawer holds two full-size 12" x 20" x 8" pans (pans sold separately)
• 5" castors; 36" work surface height
• NSF/ANSI 7 compliant for open food product

Key specifications:

• Model: TPP-AT-67D-4-HC
• Configuration: four drawers
• Pans included: (9) 1/3 size pans
• Dimensions (W x D x H): 67-3/8" x 33-5/8" x 38-7/8"
• Temperature: 33°F to 41°F
• Refrigerant: R290 (hydrocarbon)
• Horsepower: 1/4 HP
• Electrical: 115V / 60 Hz / 1 phase, 3.9 amps
• Plug: NEMA 5-15P, 10 ft cord
• Crated weight: 455 lb (approximate)
• Warranty: 7 years parts, 7 years labor, 7 years compressor

Good to know:

• Warranty: 7 years parts, 7 years labor and 7 years compressor from True for US and Canada foodservice installations.
• Same top and 9-pan rail as the TPP-AT-67D-2-HC, but with four drawers below instead of one door and two drawers.
• This 4-drawer pizza prep table with (9) 1/3 size pans draws 3.9 amps (1/4 HP) on a NEMA 5-15P plug with a 10 ft cord and ships at about 455 lb crated (True's sheet lists TBD, so this is approximate).
• Ships free by freight. Liftgate and residential delivery are available for an added fee.